KNS Brakes introduction

KNSBrakes · 08-23-2007, 06:34 PM

i was upgraded overnight by Kevin -

I mostly sell loads of pads and rotors and fluids etc. I'm a pretty hardcore sort - I'm not much into the 'i hate brake dust' deal - i like my car to stop - and I track my car (s) as often as possible I make good deals - sell honestly - and don't run too much BS anyones way. So instead of a "BIG TREMENDOUS SUPER SALE NEVER SEEN BEFORE LOWEST PIMPED OUT PRICES CALL NOW BEFORE WE EXPLODE>>>>>>

YOu can just PM or email me about brakes - no nonsense - good prices - fast delivery

brakeguru@gmail.com

I like DBA - the only non Chinese aftermarket rotor I know of - I stock em
I like Hawk - I stock it
I like TechnaFit lines - AFTER he gets it right...

I like ATE for most - good price/performance fo rthe street/weekend guy

I also get some semi cheap but better than Autozone type stuff

I really have little or no use for ceramic brake pads -
I think drillled rotors should be abolished - slotted help out a little and are plenty good enough to add a little bite/torque

I don't think turning rotors ever works very well - most people overheat crappy ceramic pads - they in turn crap all over the rotor amking an uneven transfer layer - and then someone sells em a brake job upon which they often go repeat the entire process

I like tires that allow you to realize that brakes can be pretty easily overwhelmed

and i like providing what I consider to be a pretty personal level of good customer service which in this business is pretty lacking from the "I have everything you could ever possible bolt on the car' type vendors who are about as informed about performance brakes as my wife

And...you guys have ninja posting skills....

so - how bout you?

-ken - who shall take his vendor posting to the proper section

GripDis · 09-24-2007, 10:48 AM

dba front and rear rotors
a set of pads
and ss line
give me a good price and I will be the first to buy off you on this forum!!

Bskey · 09-25-2007, 06:46 AM

GripDis... good setup choice. I had the DBA 4000, ION pads, SS lines and Motul fluid, and it was wonderful! I loved stopping nearly a much as going!

KNSBrakes · 09-25-2007, 08:37 AM

Quote:

Originally Posted by GripDis

dba front and rear rotors
a set of pads
and ss line
give me a good price and I will be the first to buy off you on this forum!!

if you don't buy it at that price you are ....

GripDis · 09-25-2007, 09:34 AM

Well great price I get payed friday so expect a phone call from me!!

lol my g/f is going to kill me but ah I won't tell her

GripDis · 09-25-2007, 09:36 AM

duh stupid me what series dba's?

KNSBrakes · 09-25-2007, 09:43 AM

4000 series slotted

The standard slotted go for less if you are interested - lmk.

GripDis · 09-25-2007, 10:16 AM

BSKEY how did you like them where they worth it and any fitment problems with stock calibers

Thanks god they have me doing This migration at work O.T. is amazing latley!!

Drift Monkey · 09-25-2007, 11:18 AM

DBA 4000 Series blank rotors w/Hawk HP+ pads F/R here. On ATE Superblue, but I need to bleed and put in my Typ200.

**Dookie** · 09-27-2007, 08:22 PM

DBA standard slotted here. Fits like a glove and works great.

GripDis · 09-28-2007, 04:22 AM

sweet I can not wait for my check to clear!!1

**Dookie** · 09-28-2007, 09:40 AM

Make sure to rate this vendor for us after you recieve your brakes. It would be good for the site.

GripDis · 09-28-2007, 09:57 AM

I am waiting for my check to hit my account and than I am ordering
as soon as I recieve everything I planned on letting everyone know how the vendor is anyway

Drift Monkey · 09-28-2007, 11:30 PM

How is the vendor?

GripDis · 09-29-2007, 05:57 AM

As Soon as I order everything I will let you all know
As of now he gave me an awesome price less than I have seen others sell it on .com
Just waiting on my check to hit my account

KNSBrakes · 10-02-2007, 12:14 PM

Quote:

Originally Posted by Drift Monkey

How is the vendor?

i kick major ass in brakes

GripDis · 10-12-2007, 06:58 AM

check your box!~!

GripDis · 10-12-2007, 06:59 AM

there are people on this forum with sick minds check you in box please lol

**Dookie** · 10-12-2007, 10:04 AM

Who you calling sick?!?!?!?

KNSBrakes · 10-12-2007, 10:14 AM

bump?

08-23-2007, 06:34 PM	#1
KNSBrakes Join Date: Aug 2007 Posts: 24	KNS Brakes introduction i was upgraded overnight by Kevin - I mostly sell loads of pads and rotors and fluids etc. I'm a pretty hardcore sort - I'm not much into the 'i hate brake dust' deal - i like my car to stop - and I track my car (s) as often as possible I make good deals - sell honestly - and don't run too much BS anyones way. So instead of a "BIG TREMENDOUS SUPER SALE NEVER SEEN BEFORE LOWEST PIMPED OUT PRICES CALL NOW BEFORE WE EXPLODE>>>>>> YOu can just PM or email me about brakes - no nonsense - good prices - fast delivery brakeguru@gmail.com I like DBA - the only non Chinese aftermarket rotor I know of - I stock em I like Hawk - I stock it I like TechnaFit lines - AFTER he gets it right... I like ATE for most - good price/performance fo rthe street/weekend guy I also get some semi cheap but better than Autozone type stuff I really have little or no use for ceramic brake pads - I think drillled rotors should be abolished - slotted help out a little and are plenty good enough to add a little bite/torque I don't think turning rotors ever works very well - most people overheat crappy ceramic pads - they in turn crap all over the rotor amking an uneven transfer layer - and then someone sells em a brake job upon which they often go repeat the entire process I like tires that allow you to realize that brakes can be pretty easily overwhelmed and i like providing what I consider to be a pretty personal level of good customer service which in this business is pretty lacking from the "I have everything you could ever possible bolt on the car' type vendors who are about as informed about performance brakes as my wife And...you guys have ninja posting skills.... so - how bout you? -ken - who shall take his vendor posting to the proper section

09-25-2007, 09:34 AM	#5
GripDis Join Date: Sep 2007 Posts: 53	Well great price I get payed friday so expect a phone call from me!!lol my g/f is going to kill me but ah I won't tell her

09-25-2007, 11:18 AM	#9
Drift Monkey LGT.org resident p0st wh0r3 Join Date: Mar 2006 Location: Houston, TX Posts: 1,526	DBA 4000 Series blank rotors w/Hawk HP+ pads F/R here. On ATE Superblue, but I need to bleed and put in my Typ200. __________________ DriftRyders Australian Rally Farm

09-28-2007, 11:30 PM	#14
Drift Monkey LGT.org resident p0st wh0r3 Join Date: Mar 2006 Location: Houston, TX Posts: 1,526	How is the vendor? __________________ DriftRyders Australian Rally Farm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-24-2007, 10:48 AM	#2
GripDis Join Date: Sep 2007 Posts: 53	dba front and rear rotors a set of pads and ss line give me a good price and I will be the first to buy off you on this forum!!

09-25-2007, 06:46 AM	#3
Bskey Join Date: Mar 2007 Posts: 1,412	GripDis... good setup choice. I had the DBA 4000, ION pads, SS lines and Motul fluid, and it was wonderful! I loved stopping nearly a much as going!

09-25-2007, 09:36 AM	#6
GripDis Join Date: Sep 2007 Posts: 53	duh stupid me what series dba's?

09-25-2007, 09:43 AM	#7
KNSBrakes Join Date: Aug 2007 Posts: 24	4000 series slotted The standard slotted go for less if you are interested - lmk.

09-25-2007, 10:16 AM	#8
GripDis Join Date: Sep 2007 Posts: 53	BSKEY how did you like them where they worth it and any fitment problems with stock calibers Thanks god they have me doing This migration at work O.T. is amazing latley!!

09-27-2007, 08:22 PM	#10
Dookie ;-0 Join Date: Mar 2007 Location: Fresno - The arm pit of CA Posts: 5,045	DBA standard slotted here. Fits like a glove and works great.

09-28-2007, 04:22 AM	#11
GripDis Join Date: Sep 2007 Posts: 53	sweet I can not wait for my check to clear!!1

09-28-2007, 09:40 AM	#12
Dookie ;-0 Join Date: Mar 2007 Location: Fresno - The arm pit of CA Posts: 5,045	Make sure to rate this vendor for us after you recieve your brakes. It would be good for the site.

09-28-2007, 09:57 AM	#13
GripDis Join Date: Sep 2007 Posts: 53	I am waiting for my check to hit my account and than I am ordering as soon as I recieve everything I planned on letting everyone know how the vendor is anyway

09-29-2007, 05:57 AM	#15
GripDis Join Date: Sep 2007 Posts: 53	As Soon as I order everything I will let you all know As of now he gave me an awesome price less than I have seen others sell it on .com Just waiting on my check to hit my account

10-12-2007, 06:58 AM	#17
GripDis Join Date: Sep 2007 Posts: 53	check your box!~!

10-12-2007, 06:59 AM	#18
GripDis Join Date: Sep 2007 Posts: 53	there are people on this forum with sick minds check you in box please lol

10-12-2007, 10:04 AM	#19
Dookie ;-0 Join Date: Mar 2007 Location: Fresno - The arm pit of CA Posts: 5,045	Who you calling sick?!?!?!?

10-12-2007, 10:14 AM	#20
KNSBrakes Join Date: Aug 2007 Posts: 24	bump?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)