Problems

Choko · 12-07-2012, 05:58 PM

G'day guys,

I just did a spark pug change on my 2000 Legacy GT which has an after market immobiliser installed. After putting the car back together I went to turn her over but was met with a beeping that sounded like it came from the immobiliser. It won't even try and turn over but the immobiliser button works fine and the electrics seem to be working just the engine won't start.
Any ideas? It's stuck in my driveway until I can start her.

Cheers,

Choko

kagenmateer · 12-09-2012, 12:43 PM

Check to see if your battery terminals are dirty

**Dookie** · 12-10-2012, 09:07 AM

Changing the plugs shouldn't have caused that. Was there anything else you did to the car?

12-07-2012, 05:58 PM	#1
Choko Junior Member Join Date: Dec 2012 Posts: 3	Problems G'day guys, I just did a spark pug change on my 2000 Legacy GT which has an after market immobiliser installed. After putting the car back together I went to turn her over but was met with a beeping that sounded like it came from the immobiliser. It won't even try and turn over but the immobiliser button works fine and the electrics seem to be working just the engine won't start. Any ideas? It's stuck in my driveway until I can start her. Cheers, Choko

12-09-2012, 12:43 PM	#2
kagenmateer Senior Member Join Date: May 2007 Location: Boise, ID Posts: 1,277	Check to see if your battery terminals are dirty __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-10-2012, 09:07 AM	#3
Dookie ;-0 Join Date: Mar 2007 Location: Fresno - The arm pit of CA Posts: 5,045	Changing the plugs shouldn't have caused that. Was there anything else you did to the car?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)