Matt's '05 Legacy GT

matt@turbotek · 10-08-2008, 04:25 AM

I bought my car about 3 months ago. I love it! Of course it was stock when I got it......that didn't last long..lol! First thing I did was have a stage 1 tune by TurboTekTuning. Felt like a different car. Next was tint by Caroptics. It has to look as good as it runs! Then came the exhaust. Turbo XS 4" dp with a CX racing exhaust. Sounds awesome. Nice low rumble..just loud enough, but not too loud. Then came the stage 2 tune. Feels even better!! I put a Walbro 255lph fuelpump in. Had to mod the housing to fit. took about 1hr. Next I'm putting in a Dominator III turbo, 750 injectors, bigger top mount innercooler, deleted tgv's and lots more goodies. Here one of many pics to come.

TSi+WRX · 10-08-2008, 04:48 AM

Good stuff! Keep it comin!

Welcome to teh .org!

matt@turbotek · 10-08-2008, 06:38 AM

Thanks. I'm also going to replace stock fuel rails. Not sure if I want Perrin or AP. I love the look of the AP lines but think Perrin might be better quality.

matt@turbotek · 10-08-2008, 07:23 AM

Here's some pics from the Walbro255lph mod. As you can see I had to remove the three tabs located on bottom of housing and the two located at the top of the housing.(From picture view) This was needed because the stock pump is shorter and the Walbro requires more room to fit. It took about an hour to complete from start to finish including reinstalling it back in car. I used a dremmel tool to remove the tabs.

john · 10-08-2008, 12:43 PM

Looking good - keep it up.

**Dookie** · 10-10-2008, 08:24 AM

Me likey!! Keep the posts and pics coming.

brownrice · 10-10-2008, 08:34 AM

nice

10-08-2008, 04:25 AM	#1
matt@turbotek Join Date: Sep 2008 Posts: 3	Matt's '05 Legacy GT I bought my car about 3 months ago. I love it! Of course it was stock when I got it......that didn't last long..lol! First thing I did was have a stage 1 tune by TurboTekTuning. Felt like a different car. Next was tint by Caroptics. It has to look as good as it runs! Then came the exhaust. Turbo XS 4" dp with a CX racing exhaust. Sounds awesome. Nice low rumble..just loud enough, but not too loud. Then came the stage 2 tune. Feels even better!! I put a Walbro 255lph fuelpump in. Had to mod the housing to fit. took about 1hr. Next I'm putting in a Dominator III turbo, 750 injectors, bigger top mount innercooler, deleted tgv's and lots more goodies. Here one of many pics to come.

10-08-2008, 04:48 AM	#2
TSi+WRX Senior Member Join Date: Mar 2006 Location: Cleveland/Shaker Hts., OH - USA Posts: 2,268	Good stuff! Keep it comin! Welcome to teh .org! __________________ <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges Me: '16 Outback 2.5i Limited Wifey: '16 WRX Premium CVT 7th Subaru Family

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-08-2008, 06:38 AM	#3
matt@turbotek Join Date: Sep 2008 Posts: 3	Thanks. I'm also going to replace stock fuel rails. Not sure if I want Perrin or AP. I love the look of the AP lines but think Perrin might be better quality.

10-08-2008, 07:23 AM	#4
matt@turbotek Join Date: Sep 2008 Posts: 3	Here's some pics from the Walbro255lph mod. As you can see I had to remove the three tabs located on bottom of housing and the two located at the top of the housing.(From picture view) This was needed because the stock pump is shorter and the Walbro requires more room to fit. It took about an hour to complete from start to finish including reinstalling it back in car. I used a dremmel tool to remove the tabs.

10-08-2008, 12:43 PM	#5
john Senior Member Join Date: Mar 2006 Location: Wisconsin Posts: 1,149	Looking good - keep it up.

10-10-2008, 08:24 AM	#6
Dookie ;-0 Join Date: Mar 2007 Location: Fresno - The arm pit of CA Posts: 5,045	Me likey!! Keep the posts and pics coming.

10-10-2008, 08:34 AM	#7
brownrice Join Date: Jul 2008 Posts: 86	nice

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)